|Technicolor Guides (not model specific)|
|This section contains guides which are not model specific because the web interface is alomost identical with only subtle difference. In fact, there is very little difference between firmware versions 15.* and 16.* so a single guide can apply to various models.|
|Technicolor - Change Gateway IP, DHCP, and DNS|
|If you need to change the IP address of the router to match your internal network or amend the range of IPs used for DHCP the below guide will help. You can also change the DNS settings if required.|
|Technicolor - Assign a Block of IP addresses|
|If you are planning to run a server for email, serve a website, or use a hardware firewall you'll usually need to request a block of IP addresses from your ISP. Here is how you configure them on your Technicolor router.|
|Technicolor - Disable SIP_ALG - Firmware 15.1+|
|If you are having issues using VoIP using a Technicolor router then it is likely to need to disable SIP_ALG. This guide is specifically for routers which have firmware versions 15.1 - 15.4.|
|Technicolor - Disable SIP_ALG - Firmware 16.+|
|If you are having issues using VoIP using a Technicolor router then it is likely to need to disable SIP_ALG. This guide is specifically for routers which have firmware versions 16.1 and above.|
|Locking down Technicolor routers|
With the latest version of firmware (16.2) it is now possible to lock down a router so it can only accept incomming connections from a specific IP address and port. This is extremely useful if you are using this router to connect a device which only needs to communicate with one place (e.g. a VoIP system).
The reason why you may want to do this is to reduce the chance a third party is able to connect to your devices from other locations.
|Using effective NAT on Technicolor routers|
|If you are plannig to host more than one identical system which requires access from the internet you will need to configure your router to allow access. The guide below provides some useful information and tips on how to use NAT to get teh best and most secure results.|
|Virtual Web Interface|
The below example is taken from the Technicolor TG589vac_v2 running Firmware 16.1. There are some differences between Firmware 15.* and 16.* but for the most part they are very similar. Although mostly complete there are some parts of the interface I'm still working on but hopefully you'll fid what you're looking for.
|Technicolor - Disable Auto Configuration|
|If you plan to move to a new ISP but keep using the original router, you may run into issues where the router automatically reverts it's settings. Some ISPs configure their Technicolor routers to use TR069 so this guide will help resolve that issue.|