Technicolor TG582n | |
![]() |
The Technicolor TG582n is high performant router; with a simultaneous operation of 802.11n 2x2, speed, security and performance are guaranteed. Featuring an intergrated 10/100Mbps 4-port switch, the Technicolor TG582n offers seamless connection of wired and wireless devices from anywhere in the home./p>
The intergrated modem supports ADSL, ADSL2 and ADSL2+. This router can also suitable for FTTC connections where an Openreach VDSL modem has been installed. |
Technicolor TG582n - Product Information | |
![]() |
Here you can find more technical information about the TG582n ADSL/FTTC router. |
Technicolor TG582n - Change Wireless Channel & Password | |
![]() |
If you are experiencing issues with poor wireless signal and need to change the channel the guide below will show you how to achieve this. It also covers where the wireless password/key can be changed. |
Technicolor TG582n - Disable SIP_ALG | |
![]() |
If you are having issues using VoIP via the TG582n the following guide may help. |
Technicolor TG582n - Setting the DNS manually (telnet) | |
![]() |
The router by default will automatically use the DNS server supplied by your ISP. If you prefer to use Googles or more secure DNS servers you can change the setting via Telnet. |
Technicolor TG582n - Configure as a Wireless Access Point | |
![]() |
The most common question we are asked is how to use the Technicolor TG582n as a wireless access point. This is no easy task and may take a lot of tweaking to get working, however, it is possible to achieve this.
The below guide may help. Please be aware you need to make sure the TG582 is using the same range (e.g. 192.168.1.*). Make sure it's looking to the main router for the gateway and try to avoid both routers using overlapping DHCP ranges. You may find it easier to disable DHCP on the TG582n however. |
Technicolor TG582n - Changing IP Address and Range | |
![]() |
If you need to confure your router to work with specific LAN IP address and DHCP range this will help. |
Technicolor TG582n - CLI Guide | |
![]() |
Fancy some light reading? This guide will let you delve into the guts of the TG582n via Telnet! |
Technicolor TG582n - Assigning a Block of IPs | |
![]() |
If you need more than one device to have and external IP this guide will help you. |
Technicolor TG582n - FTTC Manual Setup (no USB) | |
![]() |
How to configure the Technicolor TG582n (no USB) to connect to the Openreach VDSL modem on FTTC connections. |
Technicolor TG582n - FTTC Manual Setup (with USB) | |
![]() |
How to configure the Technicolor TG582n (with USB) to connect to the Openreach VDSL modem on FTTC connections. |
Technicolor TG582n - Finding out who's connected | |
![]() |
Find out which devices are currently connected to your router, or find historic device connection information. |
Technicolor TG582n - Port Forwarding | |
![]() |
Port Forwarding is so rewarding. |
Technicolor TG582n - Factory Reset | |
![]() |
How to factory reset a Technicolor TG582n. |
Technicolor TG582n - Mapping the WAN IP | |
![]() |
Mapping the WAN IP to an internal device. |
Technicolor TG582n - ADSL Manual Setup (no USB) | |
![]() |
How to set up your Technicolor TG582 (no USB) for ADSL manually. |
Technicolor TG582n - ADSL Manual Setup (with USB) | |
![]() |
How to set up your Technicolor TG582 (with USB) for ADSL manually. |